Products 52+ Smart Hardware
Spanning nine product lines: virtual power plant, electrical safety, smart lightning protection, smart fire protection, digital energy, carbon efficiency, industrial control, industrial platform and industrial AI. Every product comes with technical parameters, selection guidance and onboarding plans.
FECB2P Smart Circuit Breaker
Three-layer protection against overload/short-circuit/leakage, with remote switching control and energy metering, the core actuator terminal for VPP load aggregation and demand response.
FECM2 Smart Circuit Breaker Gateway
Multi-loop circuit-breaker data convergence, 4G/Wi-Fi cloud communication, realising unified access and management of distributed load terminals.

CW Edge Computing Gateway
100+ industrial-protocol acquisition, 4G/Wi-Fi/Ethernet cloud channels, edge computing and rule engine, supporting source-grid-load-storage coordinated scheduling.

ESA Full-Factor Smart Meter
Synchronous capture of voltage, current, power, power factor and 2nd-31st harmonics, 256 samples/cycle, 0.2-class accuracy.

ESB Three-Phase Unbalance Detector
Real-time monitoring of three-phase unbalance and zero-sequence current, warning grid-unbalance risks and reducing line losses and equipment wear.

ESF Electrical-Fire Detector
Adjustable leakage-current monitoring 30-1000mA and temperature detection 0-150 C, compliant with GB 14287, early warning for electrical-fire hazards.

EST Temperature Detector
1-16-channel temperature monitoring, supporting NTC/PT100/thermocouple sensors, real-time sensing of distribution-node temperature.

ESP Zero-Fault Voltage Detector
Monitors N-PE zero-fault voltage, ensuring power safety for precision equipment and IT systems, preventing equipment faults from grounding anomalies.
FA Arc-Fault Monitor
Compliant with UL 1699B, early identification of arc faults, combining with the AI analysis system for hidden-risk identification and confidence scoring.
FECB2P Smart Circuit Breaker
Overload/short-circuit/residual-current protection, remote switching and energy metering, adjustable leakage 30/100/300mA, integrated distribution safety and control.

ESC Leakage-Current Detector
Up to 3 independent channels of residual-current measurement (10-3000mA, 0.5-class accuracy), correction algorithm + high-speed sampling, 2 DI + 1 relay linkage.

ESI Digital Status Detector
8-channel dry-contact switch inputs, precise status monitoring, correction algorithm + high-speed sampling, 1 relay output with linkage control.

ESX Smart Edge Computing Gateway
Built-in edge-computing engine, 30 devices/2000-point data access, 4G/Wi-Fi/Ethernet cloud, offline data continuation.

SFA Full-Factor Electrical Smart Meter
Integrated collection, control, communication and management, full electrical parameters + 4-channel temperature + residual current + 2 relays, 0.2S-level energy accuracy.

FS Lightning-Protection Monitor
SPD online monitoring, microamp-accuracy leakage-current detection, supporting four/five-element and nine-element monitoring, full visibility of SPD status and life trend.

FSS Smart Surge Protective Device
Integrated smart SPD with built-in monitoring and communication, LCD/OLED display, combined lightning protection and status monitoring.

FL Lightning-Current Monitor
Peak lightning current 0.1-200kA measurement, GPS/BeiDou timing, IP67 outdoor protection, precise lightning-event attribution.

FR Ground-Resistance Detector
Three-pole ground-resistance online monitoring, 0.1-200 Ohm range, real-time sensing of grounding-system status, ensuring effective lightning protection.

FRP Ground-Resistance Monitor (Loop Method)
Loop-method ground-resistance monitoring, 0.01-2000 Ohm wide range, Ex d IIB T4 Gb explosion-proof certification, suitable for petrochemical hazardous areas.

FG Smart Lightning Gateway
Up to 128 lightning-monitoring points aggregated, unified cloud management, the data hub of an online lightning-protection platform.

ESM Lightning-Protection Detector
Self-developed 10uA leakage-current sensor, monitoring leakage/temperature/voltage/lightning-count/grounding, with proprietary life-prediction algorithm.

FSP Surge-Protection Base
Plug-in smart surge base; standard SPDs insert directly to become smart, with lightning counting, temperature monitoring and remote-signaling alarm.
FD Leakage-Current Monitor
High-accuracy AC/DC residual-current monitoring, graduated over-limit alarm + event logging, for leakage protection and fire-hazard monitoring.

ESM Full-Factor SPD Terminal
Self-developed 10uA leakage-current sensor, monitoring leakage/temperature/voltage/lightning-count/grounding/remote-signaling, with proprietary life prediction and health records.

ZL(S)1 Class-I Surge Arrester
Class I direct-strike protection, max impulse current 25kA, 10/350us waveform, MOV/gas-tube/composite selectable, response <=50ns, remote-signaling alarm.

T2 Surge Arrester (MOV Type)
Class II secondary protection, nominal 20kA / max 40kA discharge, low residual voltage Up 1.5kV, response <=50ns, 2P/4P, 35mm rail mass deployment.

T2-ZL(S)1 Surge Arrester
Class II composite SPD, MOV high-flow low-residual structure, In 20kA / Imax 40kA, remote-signaling models report failure, for precision-equipment fronts.

ZL(S)2 Surge Arrester (Class I)
Graphite-gap Class I SPD, max 50kA (10/350us) impulse current, cut-off of AC follow-up current to prevent thermal runaway, modular pluggable hot-swappable.

ESF Electrical-Fire Detector
30-1000mA leakage + 0-150 C temperature dual monitoring, GB 14287 compliant, core terminal for early electrical-fire warning.

EST Temperature Detector
1-16-channel temperature monitoring, NTC/PT100/thermocouple sensors, real-time sensing of distribution nodes and cable temperature.
FA Arc-Fault Monitor
Compliant with UL 1699B, early arc-fault identification, combining the AI engine for precise arc-fire warning.
FECB2LP Smart Leakage Circuit Breaker
Smart leakage circuit breaker integrating leakage protection with remote switching, energy metering, and fire-alarm linkage execution.

ESA Full-Factor Smart Meter (Rail-Mount)
Rail-mount installation, synchronous acquisition of voltage/current/power/harmonics, 256 samples/cycle, the energy-data base for energy supervision.

ESA Embedded Multi-Function Energy Meter
Class 0.2 accuracy, 2nd-31st harmonic analysis, embedded panel mounting, for cabinet fine-grained metering and efficiency analysis.

ESE Power-Quality Monitor
Comprehensive power-quality monitoring including harmonics, voltage deviation, frequency deviation and three-phase unbalance, for efficiency analysis.

CW Edge Computing Gateway
100+ protocol acquisition, 4G/Wi-Fi/Ethernet cloud, edge computing and rule engine, the hub for energy-data convergence and pre-processing.

ESA Full-Factor Smart Meter
Full-factor energy-consumption acquisition providing precise energy data for carbon accounting and carbon-emission calculation, carbon-intensity management.

ESE Power-Quality Monitor
Power-quality and efficiency analysis, identifying energy-saving room, supporting carbon-efficiency optimisation strategies.
FEXLINK Industrial Internet Software
Integrated carbon accounting, carbon-asset management, carbon-reporting and carbon-neutral-park energy governance, private-cloud/on-premise deployment.

CC Programmable Logic Controller
M7 processor, IEC 61131-3 compliant, up to 64 expansion modules, high-performance industrial-control core.

CR Series Remote I/O Station
EtherCAT distributed remote I/O, high-speed real-time communication, flexibly expanding industrial-control-system coverage.

CW Edge Computing Gateway
100+ protocol acquisition, 4G/Wi-Fi/Ethernet multi-channel cloud, edge computing and rule engine, the industrial-data hub.

CX Industrial Asset Wristband
Vibration and temperature monitoring, IP65/IP67 protection, LoRa/NB-IoT/4G multi-link, real-time health sensing of rotating equipment.
HMI Industrial Touchscreen
4.3-15.6 inch multi-size options, industrial-grade HMI, on-site visual operation and monitoring.
PLC I/O Expansion Module
Rich I/O expansion models: analog I/O, digital I/O, temperature collection and relay output.
FEXLINK Industrial Internet Software
Private-cloud/on-premise deployment, device monitoring, data visualization, alarm linkage and remote O&M, unified access for all devices.
Device-Management Cloud (SaaS)
MQTT/HTTP API open access, full-lifecycle device management, SaaS deployment, ready to use.

CW Edge Computing Gateway
100+ protocol acquisition, 4G/Wi-Fi/Ethernet cloud, edge computing and rule engine, the edge hub for device access and data convergence.
Electrical-Safety Risk Analysis System
Powered by the Qianzhi AI engine, fusing leakage, temperature, arc and distribution data for intelligent electrical-safety analysis and precise risk identification.
Arc Early-Warning System
Based on the Wanxiang AI engine, identifying early arc-fault risk from electrical-signal features for early arc-fire warning.
Tianyan Large Model V3.0
AI warning accuracy raised to 97.2%, 27 AI sub-models across scenarios, 408 national-standard rule-engine items, precise identification.
Taiyi Control Four-Engine Architecture
Nanosecond transient current detection, microamp current sensing, leakage detection and control, triac technology, 1us response, 100MHz.
Recommended Bundles
Typical selection bundles packed by scenario for a rapid complete data loop.
Electrical Safety Monitoring Combo
Full-element coverage of leakage + temperature + arc + power quality — the standard for electrical-fire prevention in distribution cabinets.
Ask About This BundleSmart Lightning Protection Combo
SPD online monitoring + lightning-current capture + ground-resistance sensing + lightning-protection gateway on the cloud — a full-chain lightning-protection data loop.
Edge Computing Gateway Combo
Edge acquisition + local AI analysis + cloud access — the standard networking solution for bringing multi-circuit devices to the cloud.
Ask About This BundleDownloads Resource Centre
Product brochures, manuals, selection guides, installation wiring diagrams, Modbus register maps and solution documents, all in one place.
Downloading materials requires a short form; a technical consultant will send the documents and follow up on selection needs within 24 hours.
