Lightning Protection & Grounding · Lightning Current Events

Direct Lightning Current Peak and Event Recording Solutions

Direct lightning current event recording should, under the condition of clarified down-conductor path, conductor size and installation orientation, adopt an applicable FL lightning-current recording device and aggregate via FG. The page may describe event time, path and recording purpose, but peak range, waveform capability, protection rating and installation method must be confirmed by the specific model and datasheet.

OVERVIEW

Direct lightning current event recording should, under the condition of clarified down-conductor path, conductor size and installation orientation, adopt an applicable FL lightning-current recording device and aggregate via FG. The page may describe event time, path and recording purpose, but peak range, waveform capability, protection rating and installation method must be confirmed by the specific model and datasheet.

This solution reduces the problem of lacking event evidence after a lightning strike. The starting point of data value is correctly selecting the monitored conductor and installation location, rather than inferring the lightning path from alarms alone after the fact.

Lightning Protection & GroundingLightning Current Events
Direct Lightning Current Peak and Event Recording Solutions
BEFORE / AFTER

Before retrofit → With the solution

Before retrofit

  • Lightning strike occurrence time, path and count lack continuous records, making after-the-fact reconstruction difficult.
  • Down-conductor size, coil orientation, outdoor environment and device protection conditions are inconsistent, so the installation method cannot be universal.

With the solution

  • Provides a time basis for facility inspection after a lightning strike.
  • Helps O&M distinguish lightning events from ordinary equipment faults.
  • Forms traceable lightning-protection operation records.
EFFECT ANALYSIS

How to evaluate the effect

01

Measurable signal

Install an applicable FL recording device on a confirmed down conductor or lightning-current path.

02

Data source

FL Lightning Current / Transient Current Monitor · FG Smart Gateway (Zigbee, RS485 & Ethernet)

03

Review method

The monitoring point establishes a unique correspondence with the protected object, down conductor or facility.

04

Acceptance boundary

Lightning-current recording alone cannot prove that the protected equipment is definitely damaged or undamaged.

STANDARDS

Applicable standards

Standards and protocols are listed for project applicability review; the final clause set and edition follow the project location, industry and contract.

IEC 62305 series standards for protection against lightning (applicable parts and version to be confirmed by the project)GB 50057 Design Code for Lightning Protection of Buildings (applicable clauses and version to be confirmed by the project location and design documents)
ACCEPTANCE

Acceptance and boundaries

  • The monitoring point establishes a unique correspondence with the protected object, down conductor or facility.
  • Event records have device, time and state information, and can distinguish communication anomalies.
  • The installation method and protection treatment are inspected on site without changing the function of the original lightning-protection down conductor.
PAIN POINTS

Industry Pain Points

01

Lightning strike occurrence ti…

Lightning strike occurrence time, path and count lack continuous records, making after-the-fact reconstruction difficult.

02

Down-conductor size, coil orie…

Down-conductor size, coil orientation, outdoor environment and device protection conditions are inconsistent, so the installation method cannot be universal.

ARCHITECTURE

Solution Architecture

Layered architecture, a complete data loop from sensing to operation.

Direct Lightning Current Peak and Event Recording system topologyFour-layer data flow from perception and edge control to the platform and application layers for Direct Lightning Current Peak and Event Recording.01Perception layer
Install an applicable FL recording device on a confirmed down conductor or lightning-current…
02Edge / control layer
FG aggregates lightning-current events and associates them with station, line or facility co…
03Platform layer
FEXLINK stores event time, device state and O&M verification records.
04Application layer
Lightning-protection and O&M personnel check SPDs, grounding and site facilities according t…
Perception layer
Install an applicable FL recording device on a confirmed down conductor or lightning-current path.
Edge / control layer
FG aggregates lightning-current events and associates them with station, line or facility codes.
Platform layer
FEXLINK stores event time, device state and O&M verification records.
Application layer
Lightning-protection and O&M personnel check SPDs, grounding and site facilities according to the event time.
CORE CAPABILITIES

Core Capabilities

Product 1

FL Lightning Current / Transient Current Monitor

Records events such as lightning current peak and energy; indoor/outdoor model, range, protection rating and installation orientation are confirmed by the datasheet.

Product 2

FG Smart Gateway (Zigbee, RS485 & Ethernet)

Aggregates downstream lightning-protection monitoring devices, performs protocol conversion and transmits states and events to the upper-level platform.

Product 3

FEXLINK IoT Platform

Provides device management, alarm, historical data, permission and O&M record capabilities; the deployment method is to be confirmed by the project.

DATA LOOP

Data Loop

The complete data value chain: sense -> data -> AI -> warning -> control -> operation.

01Site sensing
02Edge aggregation
03Platform analysis
04Alarm handling
05O&M closure
PRODUCT PORTFOLIO

Product Portfolio

Lightning Protection & Grounding

FL Lightning Current / Transient Current Monitor

FL Lightning Current / Transient Current Monitor

Records events such as lightning current peak and energy; indoor/outdoor model, range, protection rating and installation orientation are confirmed by the datasheet.

Lightning Protection & GroundingLightning Current Events
Lightning Current Events

FG Smart Gateway (Zigbee, RS485 & Ethernet)

FG Smart Gateway (Zigbee, RS485 & Ethernet)

Aggregates downstream lightning-protection monitoring devices, performs protocol conversion and transmits states and events to the upper-level platform.

Lightning Protection & GroundingLightning Current Events
Lightning Protection & Grounding

FEXLINK IoT Platform

FEXLINK IoT Platform

Provides device management, alarm, historical data, permission and O&M record capabilities; the deployment method is to be confirmed by the project.

Lightning Protection & GroundingLightning Current Events
CUSTOMER VALUE

Customer Value

Quantified, verifiable customer value.

Provides a time basis for …

Provides a time basis for facility inspection after a lightning strike.

Lightning Protection & GroundingLightning Current Events

Helps O&M distinguish ligh…

Helps O&M distinguish lightning events from ordinary equipment faults.

Lightning Protection & GroundingLightning Current Events

Forms traceable lightning-…

Forms traceable lightning-protection operation records.

Lightning Protection & GroundingLightning Current Events
RELATED SOLUTIONS

Related Solutions

Induced Lightning and Transient Current Monitoring

This solution is for observing small-current transient events with a clarified range. Before implementation, different phenomena such as direct lightning, induced lightning and equipment-switching overvoltage must be distinguished, to avoid interpreting data from one channel as a complete source determination.

Lightning Protection & GroundingStatus Visualization

Lightning Current Monitoring for Wind Turbine Blade Down Conductors

This solution forms continuous records of wind-turbine lightning events, providing a time basis for blade, SPD and grounding verification. The product combination and installation location must comply with the turbine model structure and on-site maintenance process.

Lightning Protection & GroundingLightning Current Events

Online Grounding Resistance Monitoring for Substations and Distribution Stations

This solution reduces blind spots in manual grounding testing and establishes traceable monitoring records. FR-01311 applies to three-electrode-method scenarios with auxiliary-electrode conditions; when such conditions are unavailable, re-evaluate the FRP loop method or other monitoring methods.

Lightning Protection & GroundingGrounding Monitoring

Grounding Continuity Monitoring for Distribution Cabinets and Equipment Cabinets

This solution focuses on the connection state between the cabinet body, door panels, grounding busbars and equipment enclosures. During implementation, first establish a grounding path diagram and measurement-point inventory, then select the loop method or other applicable products, to avoid generating invalid alarms at unreliable contacts.

Lightning Protection & GroundingGrounding Monitoring
FAQ

FAQ

A conductor that can represent the target lightning-current path and meets the sensor installation conditions should be selected, and confirmed on site by a lightning-protection professional.
The system should not be shut down directly based on event records alone; judgment should be made according to the project contingency plan in combination with SPD, grounding and equipment states.
Coverage cannot be assumed by default. The coverage scope is related to the installation location, conductor path and specific product capability, and requires point-by-point design.
FL: records events such as lightning current peak and energy; indoor/outdoor model, range, protection rating and installation orientation are confirmed by the datasheet; FG: aggregates downstream lightning-protection monitoring devices, performs protocol conversion and transmits states and events to the upper-level platform; FEXLINK: provides device management, alarm, historical data, permission and O&M record capabilities, with the deployment method confirmed by the project.
Select the sensor structure and installation accessories according to the size and orientation of the down conductor or conductor; select the specific FL model according to indoor/outdoor environment, communication method and maintainability; when small-current transient monitoring is needed, evaluate FL-11122 rather than directly extending the range of the main lightning-current device downward.
The monitoring point establishes a unique correspondence with the protected object, down conductor or facility; event records have device, time and state information, and can distinguish communication anomalies; the installation method and protection treatment are inspected on site without changing the function of the original lightning-protection down conductor.

Start Direct Lightning Current Peak and Event Recording Journey

Contact us for detailed solutions, quotes and technical support.