Direct Answer
With a limited budget, how should you choose between "installing online monitoring" and "sticking with outage preventive tests"? The answer: the two solve different problems — preventive tests are done during outages and find existing defects; online monitoring runs during operation and catches developing trends. Decide by equipment importance and outage cost: critical, high-outage-cost cubicle groups get online monitoring; general groups keep preventive tests. The mature approach is "preventive tests as the base + online monitoring for critical circuits," not an either/or choice.
At one plant with 120 panels of 10 kV switchgear and a limited budget, the decision framework was applied: 20 critical circuits (main-transformer feeders, important loads) got online monitoring (PD + temperature); 100 general circuits kept the preventive-test interval. Result: in month 8, online monitoring found a rising PD trend on one panel (alert); outage inspection found and treated a contact-box defect early; preventive tests continued covering existing defects. Cost comparison: full online coverage would cost 120 panels; the hybrid covered 20 — 80% budget saved with no reduction in critical-equipment coverage. Conclusion: the decision's core is grading by importance and outage cost, not either/or.
Because:
- The two tools differ in capability: tests find existing, online catches developing;
- Outage cost differs: one outage of a critical circuit is expensive (continuous production);
- Defect-discovery timing differs: the interval between tests is a blind zone; online is real-time;
- Investment logic differs: full online is expensive; a hybrid has the best value.
Key insight: the decision is not "either/or" but "graded combination." Importance × outage cost — critical circuits online, general circuits tested; budget spent where it matters.
At one plant, a critical busbar panel had no online monitoring and suffered an insulation-breakdown incident between two preventive tests (3 days of production stoppage). Review found the panel was of high importance and high outage cost — an "should-be-online" category that was skipped. Rectification: all critical circuits got online monitoring (PD + temperature); general circuits kept tests. Lesson: saving budget must not skip online coverage for critical circuits — importance grading is the first principle of the decision.
1. Capability Comparison of the Two Approaches
Step one: what each can do.
Outage preventive tests (DL/T 596):
- State: tests in the de-energized condition;
- Capabilities: withstand, insulation, DC resistance, dielectric loss, etc.;
- Finds: existing defects (present, not developing);
- Frequency: periodic (1–6 years by equipment);
- Criteria: explicit pass standards (handle when over limit).
Online monitoring:
- State: continuous monitoring in the energized condition;
- Capabilities: temperature, PD, insulation trends, etc.;
- Finds: developing defects (worsening, trend changes);
- Frequency: real-time continuous;
- Output: trend alerts, anomaly localization.
Capability comparison:
- What tests do cannot be replaced online (withstand, etc.);
- What online does is not covered by tests (the blind zone between tests);
- Intersection: insulation state (tests measure point values, online measures trends);
- Complementary logic: existing + developing = full picture.
Key insight: capabilities are complementary, not overlapping. Tests manage the "point" (snapshot), online manages the "line" (continuous trend) — together they form the "plane."
2. Cost and Outage Cost
Step two: how to calculate cost.
Cost composition:
- Test cost: test labor + outage loss (production stoppage/load reduction);
- Online cost: equipment purchase + installation + operations;
- Outage cost: a critical-circuit outage costs far more than the test fee;
- Total cost: direct fees + indirect loss (outage).
Outage-cost grading:
- High: main-transformer feeders, important loads (large stoppage loss);
- Medium: general production circuits (short load reduction);
- Low: auxiliary circuits (can be de-energized freely);
- Test impact: outage windows hard to schedule (continuous-production scheduling).
Investment comparison:
- Full online: full coverage but high cost (waste on non-critical circuits);
- Full tests: low cost but with a blind zone (risk on critical equipment);
- Hybrid: critical online + general tested (optimal);
- Payback view: one accident's loss exceeds years of online investment.
Key insight: cost must look at "outage cost," not the "test fee." One production stoppage on a critical circuit far exceeds online investment — invest where the equipment is important and high-outage-cost.
3. Decision Dimension: Importance × Outage Cost
Step three: how to grade.
Decision matrix:
- High importance + high outage cost: online mandatory (critical circuits);
- High importance + low outage cost: online first (high monitoring value);
- Low importance + high outage cost: online optional (per budget);
- Low importance + low outage cost: tests suffice (general circuits).
Importance judgment:
- Supply-continuity requirements (hospitals/data centers/continuous lines);
- Load class (Class 1 > Class 2 > Class 3);
- Fault consequences (stoppage/safety/equipment damage);
- Equipment condition (aging/historical defects/harsh environment).
Outage-cost judgment:
- Outage loss (stoppage hours × unit output value);
- Outage difficulty (scheduling windows, approval process);
- Backup capability (with backup can stop; without, hard);
- Safety impact (outage-operation risk).
Key insight: the decision matrix is two-dimensional grading. Importance decides "worth installing," outage cost decides "worth online" — matrix positioning makes the budget precise.
4. Combination Strategy
Step four: how to combine.
Mature approach:
- Tests as the base: all equipment tested per the code's interval (mandatory items kept);
- Critical circuits online: important + high-cost equipment gets online monitoring;
- General circuits tested: keep periodic tests (low-cost coverage);
- Anomaly linkage: online alert → schedule outage verification/repair.
Configuration plan:
- Critical groups: online monitoring (PD + temperature + insulation trends);
- General groups: tests primarily (periodic tests + spot infrared);
- Aging equipment: online first (higher defect probability);
- Harsh environments: online first (outdoor/high-humidity/high-temperature).
Implementation steps:
- Step 1: grade the equipment list (importance × outage cost);
- Step 2: determine the online scope (critical circuits first);
- Step 3: configure monitoring (PD/temperature per defect type);
- Step 4: data loop (online + tests analyzed side by side).
Key insight: the combination is "full test coverage + online on the criticals." Mandatory items not skipped, critical circuits online — budget on the edge, risk fully covered.
5. Investment-Payback Perspective
Step five: is the investment worth it.
Payback logic:
- Accident cost: one critical-equipment failure (stoppage + repair) cost;
- Online investment: monitoring equipment + installation + operations (several years);
- Comparison: one accident loss > years of online investment (high-importance equipment);
- Early-detection value: small defects treated early (far cheaper than major repair).
Quantitative reference:
- Critical circuits: online investment ≈ 10%–20% of one accident's loss;
- Early detection: early treatment vs post-fault major repair (1:3–1:10);
- Downtime: alert-based maintenance vs fault emergency repair (several times shorter);
- Non-critical circuits: online investment may exceed the benefit (keep tests).
Decision recommendations:
- High-value equipment: online investment "must be worth it" (prevent accidents);
- General equipment: test cost "is enough" (control costs);
- Budget allocation: protect the criticals first, then expand;
- Data value: monitoring data accumulates (condition assessment/interval optimization).
Key insight: payback looks at "loss avoided." One critical-circuit accident loss far exceeds online investment — preventing accidents is the greatest return.
6. Product Landing: Predictive-Maintenance Scheme
FEXLINK products land the combination strategy:
- Predictive-Maintenance Scheme: configuration graded by equipment importance (critical circuits online);
- PD + temperature monitoring: early detection of developing defects;
- Coordination with tests: side-by-side cross-validation of data;
- Trend alerts: online alert → schedule outage verification/repair.
Design principle in one sentence: "tests as the base + critical circuits online" — graded combination. Budget on the edge, risk fully covered — equipment health and investment efficiency together.
Graded implementation example (120 panels):
- Level 1 (20 critical circuits): online monitoring (PD + temperature); in month 8 a rising PD trend was found → outage treatment of a contact-box defect;
- Level 2 (40 important circuits): test interval + spot infrared inspection;
- Level 3 (60 general circuits): periodic tests per the code;
- Cost comparison: full online would cost 120 panels; the hybrid covered 20 — 80% budget saved, critical coverage unchanged.
Combination suggestions by equipment type:
- Switchgear: critical panels online (PD + temperature) + general panels tested;
- Transformers: main transformer online (temperature + PD) + distribution transformers tested;
- Cables: important circuits online (temperature) + general circuits tested;
- Motors: critical motors online (temperature + vibration) + general motors tested.
7. Common Decision Misconceptions
- Either/or thinking: all online or all tested. Consequence: wasted budget or uncovered critical equipment. Correct: graded combination.
- Purchase price only: ignoring outage cost. Consequence: critical circuits not monitored when they should be. Correct: cost = total (including outage loss).
- Even effort: equal investment across all groups. Consequence: waste on non-critical, shortage on critical. Correct: grade by importance.
- Tests stop once online is installed: mandatory items missing. Consequence: existing defects missed. Correct: tests as base, never skipped.
- Investment only, no accident accounting: online feels expensive. Consequence: one accident loss far exceeds the investment. Correct: payback view (preventing accidents = return).
Scope and Limitations
This article provides a decision framework for online monitoring vs periodic preventive tests (capability comparison, cost and outage cost, importance × outage-cost matrix, combination strategy, investment-payback perspective) for planning monitoring/test combinations for switchgear and other equipment under budget constraints. Specific equipment grading and online-monitoring configuration must be determined per on-site load class, outage windows, and historical defect conditions; test intervals and criteria follow the current DL/T 596 version; outage tests must be performed by qualified test personnel per procedures. All cases are anonymized (a certain plant) and do not refer to any specific customer.
Frequently Asked Questions
Online Monitoring vs Periodic Preventive Testing: Which One for Switchgear Insulation?
the two solve different problems — preventive tests are done during outages and find existing defects; online monitoring runs during operation and catches developing trends. Decide by equipment importance and outage cost: critical, high-outage-cost cubicle groups get online monitoring; general groups keep preventive tests